Installation Guide

You may want to periodically clean the fixture using a mild, non-abrasive glass cleaner and soft

cloth. Do NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture,

make sure you have the power turned off and do not spray liquid cleaner directly onto the bulb,

socket, ballast, or wiring.

1. While holding the diffuser (D) in the palm of your

hand(s), rotate each diffuser thumb screw (C) clockwise

until the diffuser (D) is sufficiently loosened from the

fixture pan (A) (Fig. 1). Be careful not to drop the

diffuser (D) as it comes loose from the pan (A).

BULB REPLACEMENT INSTRUCTIONS

CARE AND MAINTENANCE

2. Remove the bulb (E) by grasping it by the plastic base

and unscrewing it from the bulb socket (B)

turn in

counterclockwise direction (Fig. 2).

3. Replace with a GU24 23W self-ballasted fluorescent bulb. Install the new bulb in the same

manner you removed the old bulb. Put the diffuser (D) back onto the pan (A), and twist lock it in

place. Restore power to the fixture.

This fixture uses one (1) GU24 23W self-ballasted fluorescent bulb. These bulbs are readily available at your

local home center, and most larger hardware stores.

Before replacing bulb (E), shut off power to the fixture at the circuit breaker, or fuse panel. Allow

sufficient time for fixture and lamp to cool.

4. Dispose of the old bulb(s) in accordance to local, state, and/or federal laws, or go to