Specification

SPECIFICATION FEATURES
Reflector
Open Wall Wash - wall wash
reflector with gradient kicker
combined with a lensed upper
optical chamber provides superior
lumen output, high level vertical
illumination with minimal source
brightness.
Lensed Wall Wash - offered in all
Portfolio Alzak® finishes. Reflector
is retained with two torsion
springs holding the flange tight to
the finished ceiling surface.
Plaster Frame / Collar
Die cast aluminum 1-1/2” deep
collar accommodates ceiling
materials up to 2”. Universal
mounting bracket accepts 1/2”
EMT, C channel and bar hangers
and adjusts 5” vertically from
above and below the ceiling.
Junction Box
Listed for (8) #12 AWG (four in,
four out) 90°C conductors and feed
thru branch wiring. (4) 1/2” and (2)
3/4” trade size pry outs positioned
to allow straight conduit runs.
Lever connectors for simple push
in wiring.
Thermal
Aluminum heat sink conducts heat
away from the LED module for
optimal performance and long life.
LED
Chip on board with a multitude
of highly efficient white LED’s,
combined with a high reflectance
upper reflector and convex
transitional lens produce even
distribution with no pixilation.
Rated for 50,000 hours at 70%
lumen maintenance. Auto resetting,
thermally protected, LED’s are
turned off when safe operating
temperatures are exceeded. Color
variation within 3-step MacAdam
ellipses. Flexible disconnect
allows for tool-less replacement
of LED engine from below ceiling.
Available in 80, 90 or 97 CRI.
D2W™ – dim-to-warm shifts CCT
from 3000K to1850K as fixture dims
mimicking halogen sources.
Driver
Standard 120-277V 0-10V dimming
driver provides flicker free dimming
from 100% to 1%. Optional 120V
leading edge, <1% 0-10V, Fifth
Light, DMX or Lutron® Ecosystem.
Driver can be serviced from above
or through the aperture.
Connected Lighting Systems
WaveLinx tilemount daylight
sensor includes control module,
sensor and cable allowing use with
the comprehensive lighting system.
LumaWatt Pro (powered by
Enlighted) wireless tile mount
sensor and relay accessory enables
wireless control using a tile mount
sensor accessory.
Distributed low voltage power
system combines power, lighting,
and controls with ease of
installation.
Code Compliance
Thermally protected and cULus
listed for damp locations with
covered ceiling. Optional City of
Chicago environmental air (CCEA)
marking for plenum applications.
EMI/RFI emissions per FCC 47CFR
Part 18 Class B consumer limits.
2000 lumen and above are Non-IC
rated - Insulation must be kept 3”
from top and sides of housing.
IC rated up to 2000 lumens. 5000
lumens and above are marked
spacing and must follow spacing
requirements. RoHS Compliant.
Photometric testing completed in
accordance with IES LM 79 and
TM-30 standards. LED life testing
completed in accordance with LM
80 standards.
Warranty
5-year warranty
LD6B EU6B
6LBSW 6LBDW
6LBCW 6LBLWW
1000 - 7000 Lumens LED
STEPREPEAT>
Single, Double or Corner
Open Wall Wash
Lensed Wall Wash
New Construction
6 inch recessed LED wall wash providing glare free, even illumination
on vertical surfaces. Featuring a two-stage diffused reflector system
producing smooth distribution with excellent light control and low
aperture brightness. Lumen packages range from 1000 to 7000 with
color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K.
Available with dim-to-warm technology – similar to halogen at full
power, the 3000K LED warms smoothly as dimmed to 1850K creating a
rich warm glow within the space.
DESCRIPTION
Refer to ENERGY STAR
®
Qualified
Products List.
1000-2000 LUMENS 3000-5000 LUMENS 6000-7000 LUMENS
WALL WASH
EM OPTION
5-1/2" [140mm] 5-1/2" [140mm] 6-13/16" [173mm]
5-1/2"
[141mm]
11-15/16"
[303mm]
16-3/4"
[426mm]
6-3/8"
[161mm]
7"
[176mm]
MAX HEIGHT
(SEE TABLE)
13-3/4"
[349mm]
11-1/8"
[283mm]
TD520042EN
2017-05-01 16:33:24
Portfolio
Catalog #
Type
Project
Comments
Date
Prepared by