Installation Guide

4
Hardware Used
CC
x 2
Mounting
Screw
EE
x 2
Hex Nut
1. Place the crossbar (A) onto the backplate
of the fixture body (D) and align the holes
in the backplate with a set of threaded
holes in the crossbar (A). Install the
mounting screws (CC) in the aligned
threaded holes on the crossbar (A) and
thread the small hex nuts (EE) onto the
mounting screws (CC) as shown.
1
PREPARATION
ASSEMBLY INSTRUCTIONS
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 - 30 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Wire cutters, Electrical tape, Safety goggles and Ladder.
Helpful Tools (not included): Wire strippers
Lowes.com/portfolio
A
CC
EE
D