Installation Guide

6
Lowes.com/portfolio
6
ASSEMBLY INSTRUCTIONS
DD
4. Carefully tuck all wires into the outlet box and
position the fixture body (D) over the outlet box.
Align the holes in the backplate of the fixture
body (D) with the mounting screws (CC)
attached to the crossbar (A). Pass the fixture
over the mounting screws (CC) and secure by
threading mounting balls (FF) onto end of
screws. Tighten until snug.
Note: Fixture body (D) can be installed with the
sockets facing either up or down.
Hardware Used
5. Place the shade (C) over the socket of the
fixture body (D) and secure with the socket
collar (B). Hand-tighten until snug.
6. Install the bulbs (not included).
Use (3) 100-watt max. standard base bulbs only.
4
5
CC
x 2
Mounting
Screw
CC
A
D
FF
FF
x 2
Mounting
Ball
C
D
B