Installation Guide

Lowes.com/allenandroth
5
ASSEMBLY INSTRUCTIONS
Hardware Used
3. Attach ground fixture wire to either the green
ground screw (AA) on crossbar (A) or to the
ground wire in the outlet box (usually GREEN
or BARE). If attaching fixture ground wire to
the crossbar, it is imperative that the outlet box
in your home be properly grounded. Connect
the neutral WHITE or RIBBED side fixture wire
to the neutral usually WHITE wire from the
outlet box. Connect the hot BLACK or
SMOOTH side fixture wire to the hot usually
BLACK wire from the outlet box. Fasten wires
together with a plastic wire connector (BB) and
tightly wrap connector with electrical tape (not
included).
3
AA
x 1
Green
Ground
Screw
White Wire
From Outlet Box
Black Wire
From Outlet Box
Bare, or Green
Ground Wire
Bare, or Green
Fixture Ground Wire
From Outlet Box
Bare, or Green
Ground Wire
From Outlet Box
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
OR
AA
BB
BB
x 3
Wire
Connector
DD
4. Carefully tuck all wires into the outlet box and
position the fixture over the outlet box. Align
the holes in the ceiling canopy of the socket
assembly (D) with the mounting screws (CC)
attached to the crossbar (A). Pass the fixture
over the mounting screws (CC) and secure by
threading mounting balls (FF) onto end of
screws. Tighten until snug.
Hardware Used
4
CC
A
D
FF
FF
x 2
Mounting
Ball