Installation Guide
Lowes.com/allenandroth
6
ASSEMBLY INSTRUCTIONS
5. Screw the beaded end of the stem (E) into the
hex coupling on the bottom center of the
socket assembly (D). Hand-tighten until snug.
And then adjust the knurled nut on the stem
(E) to proper location for the shade (F) and the
finial (C).
5
D
DD
6.
Place the center hole on the bottom of the
shade (F) over the end of the stem (E). Attach
one end of side chain (B) onto the hook on the
side of the socket assembly (D). Then attach
the other end of the side chain (B) onto the
loop inside of the shade (F).
6
B
F
E
E
D