Installation Guide

7
Lowes.com/
p
ortfolio
ASSEMBLY INSTRUCTIONS
Install three standard-base 60-watt max.
incandescent bulbs or three 13-watt CFL
bulbs (none included).
CAUTION: When replacing bulbs, please
allow bulb(s), glass shade(s) and fixture to
cool down before touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
Outlet
Box
8.
9.
7.
Align holes in fixture (A) with fixture screws on
mounting plate (B) and push fixture (A) toward
wall. Attach fixture (A) to mounting plate (B) using
the mounting plate screws (BB) that were
previously removed. Note: Fixture (A) can be
installed with the sockets facing either up or down.
NOTE: Before tightening mounting plate screws
(BB) completely, use level to check fixture
(A)--adjust if necessary.
8
7
9
Remove socket ring (C) from one of the
sockets. Attach glass shade (not included)
to the socket using socket ring (C)
provided.
Repeat Step 8 for remaining sockets.
NOTE: Do not overtighten socket rings (C)
as glass may crack or break.
Glass Shade
(representative only)
Glass Shade
(representative only)
Bulb
Hardware Used
Mounting Plate Screw
x 3
BB
BB
BB
B
A
C
A