Installation Guide

ASSEMBLY INSTRUCTIONS

Attach mounting plate (B) to outlet box using the

existing washers and outlet box screws or the

machine screws (BB). Note: If the outlet box screws

required for your outlet box are of a different size

than the machine screws (BB), consult with a

licensed electrician before proceeding.

Use level (not included) to make sure preassembled

fixture screws are level vertically. This will help

ensure the fixture (A) is level when attached. Tighten

machine screws (BB) completely to secure mounting

plate (B).

CAUTION: The fixture must be mounted to an

outlet box that is supported by the building structure

and can support the weight of the fixture. Plastic

outlet boxes are not recommended.

Hardware Used

Machine Screw

x 2

Outlet Box

Washer

Fixture Screw

Adjust fixture screws to proper length by screwing

fixture screws completely into mounting plate (B).

Temporarily place fixture (A) over mounting plate

(B) to determine amount of adjustment necessary

for fixture screws -- fixture screws should come

through holes in fixture (A) just enough so

decorative nuts (D) will fit flush against fixture (A)

when mounted.

Once fixture screws are adjusted, use pliers (not

included) to tighten preassembled nuts on fixture

screws until nuts touch mounting plate (B).

Nut

Outlet

Box

Fixture

Screw