Installation Guide

7
ASSEMBLY INSTRUCTIONS
AA
AA
A
4
Outlet Box
WHITE
BLACK
BARE/
GREEN
6
AA
6.
Unwrap BARE wire on fixture (A) from BLACK and
WHITE wires. Prepare fixture wires by stripping
3/4 in. of insulation from wire ends using wire
strippers (not included). Connect WHITE wire from
fixture (A) to WHITE wire from outlet box using
existing wire connector or wire connector (AA).
Connect BLACK wire from fixture (A) to BLACK
wire from outlet box using existing wire connector
or wire connector (AA). Connect BARE/GREEN
ground wire from outlet box to BARE ground wire
from fixture (A) with wire connector (AA).
NOTE: Screw wire connectors (AA) on in a
clockwise direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply
wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA)
provided with this light fixture are designed to
accept only one 12-gauge house wire and two
lead wires from the light fixture. If your house wire
is larger than 12-gauge or there is more than one
house wire to connect to the corresponding fixture
lead wires, consult an electrician for the proper
size wire connectors to use.
x 3
Hardware Used
Wire Connector
AA
AA
AA
AA
7
7.
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Outlet
Box