Installation Guide

8
ASSEMBLY INSTRUCTIONS
9
Fixture
Screw
D
8
A
D
C
Glass Shade
(representative
only)
9.
8.
Remove socket rings (C) from sockets of fixture
(A). Attach glass shades (sold separately) to
sockets, securing with socket rings (C).
WARNING: Do not overtighten socket rings
(C) as glass may crack or break.
Align holes in fixture (A) with fixture screws in
mounting plate (B) and push fixture (A) toward
wall. Attach fixture (A) to mounting plate (B)
using the decorative nuts (D) previously
removed (Step 3, page 5).
NOTE: Fixture (A) can be installed with the
sockets facing either up or down.
D
Outlet
Box
Fixture
Screw
A
B
10
A
10.
Install three 60-watt max. standard-base
incandescent bulbs (not included) or CFL/LED
equivalent.
WARNING: When replacing bulbs, allow
bulbs, glass shades and fixture to cool down
before touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.
Bulb
(not included)