Installation Guide

ManualsBrandsPortfolio ManualsVanity LightsVB43-4BNK

ITEM #0809648

MODEL #VB43-4BNK

4-LIGHT VANITY FITTER

Français p. 9

Español p. 17

ATTACH YOUR RECEIPT HERE

Purchase Date

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

AB16753

3187807

APPROVED FOR USE IN

DAMP LOCATIONS

PORTFOLIO

and PORTFOLIO & Design

are trademarks or registered trademarks of

Summary of content (8 pages)

PAGE 1
ITEM #0809648 4-LIGHT VANITY FITTER PORTFOLIO® and PORTFOLIO & DesignTM are trademarks or registered trademarks of LF, LLC. All rights reserved. MODEL #VB43-4BNK Français p. 9 Español p. 17 3187807 ATTACH YOUR RECEIPT HERE APPROVED FOR USE IN DAMP LOCATIONS Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PAGE 2
PACKAGE CONTENTS PART A B C D E F DESCRIPTION QUANTITY Fixture 1 Mounting Plate 1 (preassembled to fixture (A)) Decorative Nut 2 (preassembled to mounting plate (B)) Socket Ring 4 (preassembled to fixture (A)) Screw 2 (preassembled to mounting plate (B)) Nut 2 (preassembled to mounting plate (B)) G Spacer (preassembled to fixture (A)) 4 H Shade Adapter 4 A B E F C D G H HARDWARE CONTENTS (shown actual size) AA Wire Connector BB Machine Screw Qty. 3 Qty.
PAGE 3
SAFETY INFORMATION • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white neutral house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PAGE 4
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
PAGE 5
ASSEMBLY INSTRUCTIONS 3. Remove decorative nuts (C) from front of fixture (A) and remove mounting plate (B) from back of fixture (A). Save decorative nuts (C) for later use. 3 C A B C 4. Feed supply wires through center of mounting plate (B). Attach mounting plate (B) to outlet box (not included) using the existing washers and outlet box screws or the machine screws (BB).
PAGE 6
ASSEMBLY INSTRUCTIONS 5. Prepare wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect BARE/GREEN ground wire from outlet box to BARE ground wire from fixture (A) with wire connector (AA). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
PAGE 7
ASSEMBLY INSTRUCTIONS 7. Secure fixture (A) to mounting plate (B) using the decorative nuts (C) previously removed (Step 3, Page 5). 7 C B A C 8. OPTIONAL: If you wish to install a glass shade (sold separately), remove socket ring (D) and spacer (G) from socket of fixture (A). Screw shade adapter (H) onto the socket of fixture (A). Note: Spacer (G) will not be used. 8 D D Glass Shade [representative only] H G Attach glass shade (sold separately) to socket, securing with socket ring (D) upside down.
PAGE 8
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb(s) will not light. POSSIBLE CAUSE 1. Bulb(s) is/are burned out. 2. Power is OFF. 3. Faulty connection. CORRECTIVE ACTION 1. Replace light bulb(s). 2. Make sure power supply is ON. 3. Check wiring and all connections.