Installation Guide

ASSEMBLY INSTRUCTIONS
5
Lowes.com/
p
ortfolio
3.
Outlet Box
D
3
BB
BB
Attach mounting plate (D) to outlet box
(not included) using existing washers and
outlet box screws or the machine screws
(BB). NOTE: If the outlet box screws required
for your outlet box are of a different size than
the machine screws (BB), consult a licensed
electrician before proceeding.
Make sure screws preassembled to mounting
plate (D) are level vertically. This will help
ensure fixture (A) is level when attached.
Tighten machine screws (BB) to secure
mounting plate (D).
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal
outlet box; plastic outlet boxes are not
recommended.
Hardware Used
Machine Screw
x 2
BB
Remove decorative nuts (E) from fixture screws
preassembled on mounting plate (D) and save
decorative nuts (E) for later use. Adjust fixture
screws to proper length by screwing fixture
screws completely into mounting plate (D).
Temporarily place fixture (A) over mounting
plate (D) to determine amount of adjustment
necessary for fixture screws -- fixture screws
should come through holes in fixture (A) just
enough so decorative nuts (E) will fit flush
against fixture (A) when mounted.
Once fixture screws are adjusted, use pliers (not
included) to tighten preassembled nuts on fixture
screws until nuts touch mounting plate (D).
4
E
A
E
D
Nut
Outlet
Box
Fixture
Screw
4.