Installation Guide

ASSEMBLY INSTRUCTIONS
7.
8.
9.
7
Lowes.com/
p
ortfolio
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the next page.
Install one standard-base bulb (not included).
Use either a 100-watt max. incandescent or a
23-watt CFL.
CAUTION: When replacing bulb, please
allow bulb and fixture to cool down before
touching.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
Secure fixture (A) to mounting strap (B) with
decorative nut (C) that was previously removed
(Step 3, Page 5).
NOTE: Before tightening decorative nut (C)
completely, use level (not included) to check
fixture (A) -- adjust if necessary.
8
Bulb
7
B
C
A
After completing installation, caulk fixture (A)
mounting surface with silicone weather
sealant (not included).
WARNING: Failure to caulk fixture
mounting surface with silicone weather
sealant may result in water damage in outlet
box, which may cause electrical malfunction
or electrical shock.
A
9
A