Installation Guide

6
ASSEMBLY INSTRUCTIONS
Attach mounting strap (B) to outlet box (not
included) using the existing washers and outlet box
screws or the machine screws (BB). NOTE: If the
outlet box screws required for your outlet box are of
a different size than the machine screws (BB),
consult with a licensed electrician before
proceeding. Tighten machine screws (BB)
completely to secure mounting strap (B).
CAUTION: The fixture must be mounted to an outlet
box that is supported by the building structure.
Plastic outlet boxes are not recommended.
3.
4.
Prepare wire by stripping 3/4 in. of insulation from
wire ends using wire strippers (not included).
5a
5a.
Hardware Used
Machine Screw
x 2
BB
Remove decorative nut (C) from threaded nipple
on mounting strap (B).
Save decorative nut (C) for later use.
4
Outlet Box
3
B
C
Threaded
Nipple
BB
B
BB