Installation Guide

8
ASSEMBLY INSTRUCTIONS
7.
7
9.
After completing installation, caulk fixture (A)
mounting surface with silicone weather sealant
(not included).
WARNING: Failure to caulk fixture mounting
surface with silicone weather sealant may result
in water damage in outlet box, which may cause
electrical malfunction or electrical shock.
8.
8
9
Secure fixture (A) to mounting strap (B) with
decorative nut (C) that was previously removed
(Step 3, Page 5).
NOTE: Before tightening decorative nut (C)
completely, use level (not included) to check
fixture (A) -- adjust if necessary.
Place glass shade (D) into fixture (A) and twist
glass shade (D) to the right (clockwise) until it
stops.
NOTE: Do not remove rubber gasket from glass
shade (D).
Restore power and test fixture (A).
If light does not function, please refer to
TROUBLESHOOTING on the next page.
A
C
B
A
D
Rubber
Gasket
A