BM5 Vtfs!Nbovbm TIFO[IFO!QPSULFZT!FMFDUSPOJD!UFDIOPMPHZ!DP/-MUE
1 BM5 Product Appearance Size 83MM 2 BM5 Standard Accessories BM5 Monitor X1 Camera Control Cable X1 Tempered Glass Film X2 Screen Cleaning Wipe X1 Warranty Card X1 M2 L-Type Inner Allen Key X1 137MM Parameter Size Dimension Custom Function Keys Indicator EXIT Focus Follow Control Interface Sliding Menu (volume+/-) Battery Plate Lock Power Switch SDI Input/Output HDMI Input 178°H/178°V Brightness(nit) 2000 Resolution USB Upgrade Port 350g 8bit Backlight LED Material Aluminum Alloy +
BM5 4 BM5 Supported input/output resolution and frame rate [Video Config] HDMI Signal 1920×1080p@23.97Hz,24Hz,25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz Brightness Press MENU, Then 0~100 1920×1080psf@23.97Hz,24Hz,25Hz,29.97Hz,30Hz Contrast Press MENU, Then 0~100 Chroma Press MENU, Then 0~100 Sharpness Press MENU, Then 0/10/20/30/40/50/60/70/80/90/100 Tint Press MENU, Then 0~100 Color Temperature Press MENU, Then 5600K/6500K/7500K/9300K/Manual 1920×1080i@50Hz,59.
5 BM5 Flip Control Press MENU 6 BM5 Display Flip Mode Press MENU, Then On/Off H Flip Press MENU, Then On/Off Display Flip *Zooming V Flip Osd Flip *Audio Meters Press MENU, Then On/Off Osd Flip Mode Press MENU, Then On/Off H Flip Press MENU, Then On/Off V Flip Press MENU, Then On/Off *Camera Control Function 1 Press MENU Back Voltage Display Press MENU, Then On/Off Fan Press MENU, Then Low/Middle/High Touch Control Press MENU, Then On/Off SDI 1080P to l Scan Press ME
7 BM5 Long press in 3 sec set "Camera Control " onto one custom function key Long press in 3 sec set "Grids " onto one custom function key [Camera Control Setting] *The signal needs to be connected before setting.
9 BM5 Factor Press MENU, Then 0～128 Color Press MENU, Then Blue/Black/White/Red/Green 10 BM5 Long press in 3 sec set "Audio Meters " onto one custom function key [Audio Meters ] Exit Long press in 3 sec set "UnderScan " onto one custom function key [UnderScan Setting] Factor Press MENU, Then 50～100 Audio Meters Press MENU, Then On/Off Position Press MENU, Then Top/Left/Division/Right/Bottom Blending Press MENU, Then 0~100 Exit Exit Long press in 3 sec set "Waveform " onto one cus
11 BM5 [Waveform Setting] Waveform Luma Waverform Press MENU, Then Four Screen Options > Blending -- SDI WF Mode 12 BM5 Press MENU, Then On Screen/Output Luma Waverform Position Press MENU, Then On/Off Press MENU, Then L+B/M+B/R+B/L+T/ M+T上/R+T/L+C/R+C Back RGB Waverform RGB Waverform Exit Position Press MENU, Then On/Off Press MENU, Then R+B/L+T/M+T/R+T/ L+C/R+C/L+B/M+B Back [Waveform Setting] Waveform VectorScope Press MENU, Then All Types Options > Blending -- Vector
13 BM5 14 BM5 Touch Gestures Instructions： Canon 5 6 Click Display shortcut key on/off and signal parameter information Slide 7 Drag image 8 Double finger pinch Double finger spread Zoom out image Zoom in image 2 1 Canon 9 3 10 4 Camera Control Page Introduction (a) 11 zoom 12 IRIS 13 14 15 www.pkscorp.
15 BM5 1、(a)：Click " FOCUS Canon(LANC) ",Focus Adjustment (During adjusting focus,peaking will be turned on actomatically and turned off in 1s delay ) (b)：Click " ",Aperture Size Adjustment(+/-) (c)：Click " ",Shutter Time Adjustment(+/-) (d)：Click " ",ISO Control Adjustment(+/-) 16 BM5 3 4 2 5 1 2：Record (During REC on, hidden other icons.
17 BM5 18 BM5 16：After setting,the Motor Drive runs 13 zoom 14 IRIS 17：Drag to adjust Motor Drive's travel Motor 18：A/B point operation speed adjustment 15 16 automatically at A/B point AUTO 18 19 TIME CAL A 17 1、(a)：Click " FOCUS 20 21 19:Motor Drive POST 20:A point set/cacel 21:B point set/cacel B Sony ",Focus Adjustment (During adjusting focus,peaking will be turned on actomatically and turned off in 1s delay ) (b)：Click " ",Aperture Size Adjustment(+/-/Auto) 5 2：Record (Dur
19 BM5 20 BM5 9：Switch to Control ISO Adjustment 10：Adjust NO.1 Motor Drive of Nucleus-M or Nucleus-N 11：Adjust NO.2 Motor Drive of Nucleus-M 12：Adjust NO.
21 BM5 22 BM5 (b)：Click " ",Focus Length T/W Control Page (c)：Click " ",Aperture Size Adjustment(+/-/Auto) (d)：Click " ",Handle Wheel can be Adjusted（+/-） 2：Record (During REC on, hidden other icons.
23 BM5 24 BM5 9：After setting,the Motor Drive runs Panasonic automatically at A/B point 10：Drag to adjust Motor Drive's travel 5 2 11：A/B point operation speed adjustment 12：Motor Drive POST 1 13：A point set/cacel Panasonic 14：B point set/cacel 3 4 6 zoom 7 IRIS 5 11 AUTO TIME 12 2 13 14 1 BMPCC CAL A 10 4 6 Motor 8 9 BMPCC 3 B 1：Zoom 2：Record 3：Shoot 4：Focus（Hold down the icon and swipe up to take a picture） 5：Switch the control interface 6：Adjust NO.
25 BM5 7 zoom 8 IRIS 9 10 Remote Motor 12 AUTO 26 BM5 13 CAL TIME A 11 1、(a)：Click " 3 14 15 FOCUS Remote B 1 2 ",Focus Adjustment (During adjusting focus,peaking will be turned on actomatically and turned off in 1s delay ) (b)：Click " ",Aperture Size Adjustment(+/-/Auto) 2：Record 4 zoom 3：Focus 5 IRIS 4：Switch the control interface 6 9 5：Switch to Control Focus 6：Switch to Control the Size of Aperture 7：Adjust NO.1 Motor Drive of Nucleus-M or Nucleus-N 8：Adjust NO.
27 BM5 28 BM5 8：Drag to adjust Motor Drive's travel 9：A/B point operation speed adjustment 14 10：Motor Drive POST 11：A point set/cacel 15 12：B point set/cacel 16 RES 13 Z CAM E2 17 Z CAM E2 7 6 5 4 2 RES FPS VFR CT 8 9 10 1 Z CAM E2 11 3 12 (a) (b) (c) (d) Z CAM E2 18 19 (a) (b) www.pkscorp.
29 BM5 30 BM5 12：Switch to Control ISO Adjustment 23 zoom 24 IRIS 25 26 (When switch to camera control function,adjustment key will be changed as well) Motor 28 AUTO TIME 29 30 31 CAL A 27 13、(a)：Click " B ",Resolution adjustment (b)：Click " ",Frame adjustment (c)：Click " ",Manual frame adjustment (d)：Click " ",Color temperature adjustment 14：Switch to resolution adjustment 15：Switch to frame adjustment 1、(a)：Click " ",Focus Adjustment (During adjusting focus,peaking will be t
31 BM5 32 BM5 Universal Software Upgrade Tutorial Attention: 1、Firmware upgrade divides into main firmware upgrade and MCU upgrade；If upgrade the main software, just put the main software upgrade file into the root directory of the U disk;If the main software and the MCU need to be upgraded,then both the upgrade files should be put in the root directory of the U disk. Supply power to the monitor,insert the U disk USB Upgrade Port with upgrade file into U Disk the USB interface of the body.
33 BM5 BM5 34 Click and confrim upgrade. Are You Sure？ Yes No Upgrading is in progress.After that,the monitor will restart in black screen automatically Software Upgrade 16% (Do not power off during this process). After completing the upgrade,boot up the monitor and click Main Firmware Ver BM5-V1.01.23 Menu → Firmware → Virsion Information to confrim whether the software is successfully upgraded. www.pkscorp.
