User's Manual

10
Set the SMS Number of the server. The unit will send reports to the server if GPRS connection is failed.
AUTO GPS fix: the report will be display “A” in the report and indicate that if the number of satellite is
more than 3 or equal to 3. If the number of satellite is less than 3, then it will show “L” in GPS fix section.
3D GPS fix only: the report will be display “A” in the report and indicate that if the number of satellite is
more than 4 or equal to 4. If the number of satellite is less than 4, then it will show “L” in GPS fix section.
2D and 3D GPS fix display: the report will be display “A” in the report and indicate that if the number of
satellite is more than 4 or equal to 4.
If the number of satellite is equal to 3, then the report will show “B” in GPS fix section.
If the number of satellite is less than 3, then the report will show “L” in GPS fix section.
UNIT can save 6000 reports (6000-1) recently; Click ‘Export’ button can export them with Excel or Text
format.
“Initialize ” button: clear all data in UNIT.
Request All: read out the whole existing setting from GT3200ST.
Request: read out the setting in the current page.
Apply: transfer the setting to GT3200ST in the current pages.
Apply All: transfer the whole setting to GT3200ST.
Load: load the saved configuration files.
Save: save the current configuration setting to a file.
“Exit ” button: exit PC-Setup to main program.
Note that Device ID , GPRS Login and server IP/Port information need to be input correctly in order to
make the connection. If the report sending using GPRS connection fails, the report will be sent to the
‘primary’ SMS number first. The report will be resent, when the GPRS connection becomes available.