User's Manual

During the sleep mode, if any of the inputs are triggered, the system will wake up and send relevant reports

to the server. The input triggers for waking the device up are selectable. When ACC is on, the system will

back to working mode and stay connected to the TCP/UDP server in GPRS network.

1.15 2-STAGE SHOCK SENSOR (Optional)

If car is lightly vibrated, siren will sound five times and parking light will flash five times to warn. If car

receives a heavy shock, siren will sound and parking light will flash for 30 seconds.

1.16 Monitor mode

There is two way enter the monitor mode: 1. Password way, you sent the password of preset in PC-setup by

SMS, if the password is right, then you will receive the PASS message, and system will enter the monitor

mode; 2. Valet switch way, if you press Valet switch once within one second anytime, then system will enter

the monitor mode. After the system enter the monitor mode, unit will auto answer the phone in the following

10 minutes. The system will auto exit monitor mode after 10 minutes.

II. BASIC FUNCTIONS

FUNCTIONS APPLICATIONS

GPS

GPS receiver will output a complete position, velocity, and time (PVT) solution in the

NMEA Version 3.0 protocol

GPRS, SMS

GPRS use standard TCP or UDP communicate protocol. If the GPRS service is failed,

the SMS mode will be turned on for emergency use.

9 input

In-vehicle Door -

In-vehicle door +

In-vehicle ACC

Temperature sensor /AD port (Optional)

Shock-sensor port

Crash sensor port

Valet switch port

Wireless 20- key keypad

RF-receive port (Optional)

8 output

1. Parking light

2. Door Lock

3. Door Unlock

4. ARM

5. Horn

6. Audio port (microphone and hand free)

7. Handset port (Optional)

8. Trunk output

Valet Switch

(1) Send help report and enter the monitor mode (2) activate or deactivate Immediate

Geofence (3) Activate panic mode (4) sending ‘Duty on’ or ‘Duty off’ report to the

server (5) Emergency release to exit ‘ARM’, ‘Anti-carjacking’ or ‘Panic’ modes (6)

code learning for build in alarm, (7) set valet mode for build in alarm

wireless keypad (1) “II” Hang up a phone (2) “I” Answer a phone or redial a phone