User's Manual

6
Anytime the unit can call out and pick up phone call as well. to dial the number directly through the keypad.
a. After dialing the telephone number, press button
once or button〝Ⅰ〞of two button valet
switch once dial out. If the dialing is successful, HAND FREE will ring, each time the button is
pressed, the HANDFREE will chirp once as indication. Once the dialogist picks up the phone, the
user can start talk with that person. Press button
once or button〝Ⅱ〞of two button valet
switch once will hang up the phone call.
b. If phone call comes in, HANDFREE will ring. User can either press button
once or button
〝Ⅰ〞of two button valet switch once to pick up the phone or press button
once or button
〝Ⅱ〞of two button valet switch once to hang up.
c. On the above operation, the interval between pressing each two buttons must be finished within 5
seconds, otherwise the unit will exit current mode automatically. If phone number is entered
incorrect, user can press button once clear all the input, and then user needs to restart
entering.
IV. Valet switch OPERATION
(1) Sending help report
Press the button once, The LED will flash once and a help report will be generated and the system will enter
the monitor mode
(2) Activate or deactivate Immediate Geofence
Press the button and release it when the LED flashes once. After releasing it, the LED will stay continuously
on to indicate the ‘Immediate Geofence’ is on. To deactivate: Press the button (the LED will be temporally
off), and release it when the LED flashes once. After releasing it, the LED will then stay continuously off. A
report will be sent out if the vehicle goes out/in to the Geofence zone.
(3) Activate/Deactivate panic mode and send ‘panic’ report
Press the button (the LED will be temporally stay off) and release it when the LED flashes twice. After
releasing it, the panic mode is been triggered and the panic report is sent out. In panic mode, the horn will
sound and the parking light will flash. To exit panic mode: press the button (the LED will be temporally stay
off), and release it when the LED flashes twice. After releasing it, the horn and parking light will stop.
(4) ‘Duty on’ or ‘Duty off reports / ‘Status on’ Status off reports
Press the button (the LED will be temporally stay off) and release it when the LED flashes 3 times. After
releasing it, a ‘Duty on’ report will be sent out. To deactivate: Press the button (the LED will be temporally
stay off) and release it when the LED flashes 3 times. After releasing it, a ‘Duty off report will be sent out.
(5) Emergency release to exit ‘ARM’, ‘Anti-carjacking’ or ‘Panic’ modes.
ACC ON, press the button (the LED will be temporally stay off) and release it when the LED flashes 5 times.
After releasing it, ‘ARM’, ‘parking light’, and ‘horn’ outputs will back to normal (Disarm) status.