User's Manual

In Commercial Confidence
12
Report Setup ACK event
502 Setup the Circular Geofence or Immediate Geofence parameters
505 Setup SMS telephone number.
507 Clear SMS date and max. SMS set
531 Setup Fixed time report
532 Setup Intelligent report
533 Setup Intelligent history report
534 Setup the Maximum speed limit
535 Setup the Self-diagnostic report
536 Setup the fixed distance report
537 Setup Course change report
539 Remote setup server IP and port
540 Setup Low Battery report
579 Setup tamper switch change report
580 Setup ACC tamper switch change report
581 Setup general input1 detect report
582 Setup general input2 detect report
583 Setup shock sensor input detect report
CONNECTED WIRES LIST
1. Red wire 18awg – System power (+24V Constant)
The RED wire supplies power to the system. Connect this to a constant +24V volt source.
2.Yellow wire 18awg –––Cut relay NO
This wire connects to the cutter relay NO contact; when the system is armed, the wire will connect to the other
cut relay yellow wire.
3.Yellow wire 18awg –––Cut relay COM
This wire connects to the cutter relay COM contact; when the system is armed, the wire will connect to the
other cut relay yellow wire.
4.Yellow wire 22awg–– ACC Sensing Input
This wire should be connected to vehicle ACC. When the vehicle ACC is ON, the wire can sense a high voltage
to inform the system act.
5. White wire 18awg--- Siren output
This wire can connect to a siren (+), which can provide maximum 1.5A current.
6.Black wire, Ground
The wire connects the system ground. This is main ground connection of system. Make this connection to a
solid section of the vehicle frame. Do not connect this wire to any existing ground wires supplied by the factory
wire loom; make the connection to the vehicle's frame directly.
7. Brown wire 22awg: General Trigger Input1
This wire can be activated by a low digital trigger input, normally the port maintains high level.
8. Brown/Yellow wire 22awg: General Trigger Input2
This wire can be activated by a low digital trigger input; normally the port maintains high level.
9.Black Cable for LED & Valet Switch