User's Manual

In Commercial Confidence
7
In the working mode, the system will use the configurations as defined in this section. To activate the automatic
report, please select “√” in checkbox and fill in data in the textbox.
The reports will be summarized as
(1) Intelligent report
Parameters: On/Off, Report time when moving, Report time when stop, and Moving Speed (min. Speed is 0.1
km/Hr, max. Speed is 1000 km/Hr).
(2) Intelligent history report (record the report in the system’s flash ram)
Parameters: On/Off, Report time when moving, Report time when stop, and Moving Speed (min. Speed is 0.1
km/Hr, max. Speed is 1000 km/Hr).
(3) Fixed time report
Parameters: On/Off, and time.
(4) Fixed distance report
Parameters: On/Off, and distance. (min. distance is 0.1 km, max. distance is 100 km).
(5) Course change report
Parameters: On/Off, and course change in degree.
(6) Low battery warning report (to alert user when the battery level is low)
Parameters: On/Off, and warning battery level for report. For example, 60 to represent 60% lower level report.
The system will ignore the parameter with a value ‘0’ to prevent continuous non-stop reporting.
Power cut report: default is on. When the external power is cut, a POWER CUT report will be sent to the
server.
(7) Speeding report: (min. speed is 0.1 km/Hr, max. speed is 1000 km/Hr).
Parameters: on/off, and speed
4.[Trigger report and sleep mode setup]