User's Manual

17
C
HANNEL 3 OUTPUT (SEE FUNCTION SELECTION J2-5 /J2-12)
a. Anytime, first press button 4 once then press button 3 once within 3 seconds will to
remote channel 3output (with 300mA negative output).
b. The two-way transmitter LCD screen will display channel 3 output icon.
c. If the system is in arming at this time, the trunk trigger, ext sensor is by-pass till the
channel output off. After 4 seconds, the system is in arm mode again.
C
HANNEL 4 OUTPUT (SEE FUNCTION SELECTION J2-6 / J2-13)
a. Anytime, first press button 4 once then press button 4 once within 3 seconds will to
remote channel 4 output (with 300mA negative output).
b. The two-way transmitter LCD screen will display channel 4 output icon.
c. If the system is in arming at this time, the trunk trigger, ext sensor is by-pass till the
channel output off. After 4 seconds, the system is in arm mode again.
PANIC MODE
a. Anytime press and hold button 1 for 2 seconds. The siren will sound and parking
lights will flash for 30 seconds
b. The two-way transmitter LCD screen will display siren icon and sound.
c. Press button 1or 2 to stop the panic.
CAR FINDER
a. The system is armed.
b. Press button 1: siren will chirp 6 times, the parking lights will flash 12 times. At the
same time, the door will lock.
c. Press button 2 to stop car finder and disarm.
SYSTEM’S STATUS CHECK
Anytime press button 4 once then press button 5 once within 3 seconds, the system’s
present status and current temperature will be shown on two-way transmitter LCD screen
for five seconds.