User's Manual

18
P
OWER ON MEMORY
This security system is equipped with circuitry that will allow the unit to remember its
alarm status if the power is lost and then reconnected.
V
ALET MODE
a. The system is disarming, turn ignition ON, within 8 seconds press and hold valet
switch 3 seconds for once or press button 2+4 once together on T36 or press button
5 twice within 3 seconds on T35.
b. LED will be constantly ON, the parking light will flash once.
c. The two-way transmitter LCD screen will display valet mode icon, which indicates
that system enters valet mode.
d. In VALET mode, siren will chirp once and parking lights will flash once when lock
the door, and siren will chirp twice and parking lights will flash twice when unlock
the door.
e. In Valet mode, there is no arm and trigger alarm function, and it cannot enter smart
immobilization and anti car jacking.
f. Leave valet mode: press button 2+4 once together on T36 or press button 5 twice
within 3 seconds on T35.
g. LED will be OFF, and the parking light will flash twice which indicates that system
exit valet mode.
A
NTI CAR JACKING (SEE FUNCTION SELECTION J2-1, 2)
The system provides 3 ways to enter anti-car jacking mode.
For MODE A, there are three ways to enter anti carjacking:
a. When ignition ON, first press transmitter button 4 once then press button 1 once
within 3 seconds to activate the anti carjacking.
b. When ignition ON, after the door is opened, the system will enter anti carjacking.
Within 10 seconds, pressing button 1 once of the transmitter will bypass the action
of opening the door, and the system will exit anti carjacking mode. And the parking
will flash once and siren will chirp once. Or perform Emergency disarming to exit
the anti car jacking mode, that is to say, Within 71 seconds press and hold valet
switch once for one second to exit anti jacking mode.