User's Manual

FEATURE MENU 3 EXPLANATION:

J3-1. V

EHICLE MODE

Pre-set: Automatic gear car: Without ‘ready mode’, remote start directly

Variable1: Manual gear car: The ‘ready mode’ routine has been completed successfully

system can remote start

J3-2. M

ANUAL GEAR CAR RESERVATION SETTING MODE

Pre-set: Manual setting: When the engine running, press button 3+4 once to routine ‘ready

mode’

Variable1: Auto pre-set setting: When the engine running exceed 10 seconds, ignition OFF

will automatically routine ‘ready mode’

J3-3. E

NGINE CHECK SELECTION WHEN REMOTE START

Pre-set: Engine check ON: remote start successfully, to detect voltage rise or RPM signal.

(if voltage rise or RPM signal is interrupted suddenly, the unit will start two times).

Variable 1: Engine check OFF: remote start successfully, to detect voltage rise or RPM

signal. (if voltage rise or RPM signal is interrupted suddenly, the unit will not start).

J3-4. C

HECK MODE WHEN START

Pre-set: Voltage checking type.

Variable 1: RPM checking type.

J3-5. V

OLTAGE CHECK LEVEL

Pre-set: High voltage checks level.

Variable 1: Low voltage checks level.

J3-6.

CRANK TIME SELECTION

Pre-set: 1 second.

Variable1: 0.6 seconds.

Variable2: 0.8 second.

Variable3: 2 seconds.