User's Manual

Press 5 once Enter clock minute setting

Press button 1 for time add

Press button 2 for time reduce

Press 5 once Setting backlight ON/OFF

Press button 1 to turn on backlight

Press button 2 to turn off backlight

Press 5 once Vibration motor ON/OFF

Press button 1 for vibration on

Press button 2 for vibration off

Press 5 once

Arm/disarm siren chirp

ON/OFF

Press button 1 for siren chirp on

Press button 2 for siren chirp off

Press 5 once

Setting shock sensor bypass

ON/OFF

Press button 1 for shock bypass on

Press button 2 for shock bypass off

Press 5 once Auto power-off setting

Press button 1 for day increase

Press button 2 for day reduce

Press 5 for 2 sec. Exit Program mode Program mode

WO WAY TRANSMITTER T35 SETTING OPERATION:

Anytime Press 5 for 2 sec., the transmitter will enter program setting mode, then the ICON

of the time clock, alarm clock, shock bypass, temperature unit, siren and vibrate, backlight

LED will begin to flash.

The first setting item is HOUR, using button 1 or button 2 to adjust up and down the

HOUR. After setting the HOUR, Press button 5 once to minute setting, the operation is the

same as HOUR setting. Then the time clock setting is over, press button 5 once will enter

the temperature unit setting, press button 1 set the temperature unit is , press button 2 set ℃

the temperature unit is , After th℉ e temperature unit setting, press button 5 once to alarm

clock setting. If the alarm clock is setting ON, then auto entry the time clock setting, the

procedure is the same as time clock setting. After the alarm clock setting, press button 5

once will enter the backlight LED setting; press button 1 to set the backlight LED function

will ON, press button 2 set the backlight LED function will OFF (The backlight LED will

not light when any button be pressed). After the backlight LED setting, press button 5 once

will entry the vibration setting, press button 1 set the vibration function will ON (every

trigger, the transmitter motor will continue running), press button 2 set the vibration

function will OFF (every trigger, the transmitter motor will not running). After the vibration

setting, press button 5 once will entry the sound setting, press button 1 set the sound