User's Manual

5
1 Getting Started
1.1 Getting to know your touch phone
1.2 Installing the SIM card and storage card
To install the SIM card
Turn off the phone, pull out card slot.
Add the SIM card according to instruction on the card slot.
When you need to remove the SIM card, please shut down.
* Note: • The phone can be supported the double SIM cards. Your phone is
supported both 2G SIM card and 4G SIM card.
If you need to use 4G operation, please insert 4G card in the card slot 1
(Default SIM1 card, defined in the menu Settings/more/Cellular
networks/Preferred network type, the SIM2 card will be supported 2G
network only.
• Some legacy SIM cards may not function with your device. You should
consult with your service provider for a replacement SIM card. There may
be fees for this service.
To install a memory card
Turn off the phone and pull out the card slot.
Add the memory card according to instruction on the card slot.
1.3 Charging the Battery
New batteries are shipped partially charged. Before you start using your device,
it is recommended that you charge the battery. Some batteries perform best after
several full charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with your device must
be used to charge the device.
Connect the USB connector of the AC adapter to the sync connector on your
device, and then plug in the AC adapter to an electrical outlet to start charging
the battery.
As the battery is being charged while the device is on, a charging icon appears
in the title bar of the Home screen. After the battery has been fully charged, a
full battery icon appears in the title bar of the Home screen.