User's Manual

4
 Charge up
To charge the battery, plug in the charger connector at your tablet (USB interface) and
then plug the other end into an AC power socket.
The battery symbol indicates the charging status. While charging, the charge indicator
light will be red. When the charger indicator light turn green, the battery is fully charged.
Disconnect the charger from the tablet. Disconnect the charger from the AC power socket.
Attention: Charge the tablet in a well ventilated place in which the temperature is
from-10
o
C to +55
o
C. Use the charger provided by the manufacturer only. The use of
unconfirmed charger may lead to dangers and violate the manufacturer's warranty
clause. If the temperature is too high or too low during the charge, the device will
automatically send a warning and stop charging to avoid damage to the battery or
any danger.
Switch On and Off
Do a long press the Power on/off key to power on/off the phone.
Before inserting the SIM card, you should power off the tablet pc.
After inserting the SIM card, the screen will show the notes when the tablet is switched on.
Unlock SIM card
To avoid illegal use, the SIM card is enciphered with PIN (personal identification number )
as a protection. When this function is ON and you have already set a PIN code, you need
to type in PIN code every time the handset is switched on in order to unlock SIM card and
use the handset.
You can turn off the SIM PIN code. Yet in this situation, the SIM card can't prevent illegal
use.
 Input PIN code, press arrowhead icon to erase typing error and press OK to end
typing. For example, if the PIN code is set as 1234, then type "1234" then press OK.