User's Manual

11
For MT-4308W/H & MT-4310W/H & MT-4210A/H
1. Find the power jack on the left side of your tablet, and then connect
the power connector of the power adaptor to it.
2. Plug the AC power adaptor cord into an electrical outlet to initiate the
charging process.
Status LED Indicator
LED indicator is specially designed to deliver special message regarding the
current system status and battery life. The blow chart enumerates all the
possible LED indicators and its meaning for your reference.
LED Status
System Status
Descriptions
Solid blue
ON
￭ System booting.
Solid Orange
ON
￭ System is being charged.
Blinking Orange
ON
￭ Battery charging error occurs
OFF
ON
￭ System enters sleep mode.
￭ System has been booted to Windows.
￭ Battery is fully charged.
OFF
OFF
￭ System powers off
Powering ON/OFF MT-4308W/4310W/4210A
Power ON MT-4308W/4310W/4210A
To power on MT-4308W/4310W/4210A, keep pressing the power button
of the machine for 5-10 seconds. If the terminal falls into the sleep mode
after remaining idle for a specific period of time, push the power button to
wake the device up.
Power OFF MT-4308W/4310W/4210A
When MT-4308W/4310W/4210A stays in idle mode, push the power
button to put your device into sleep mode, and press the power button
again to wake up the tablet. To completely shut down the machine, you
need to press and hold the power button for at least 20 seconds. In the case
the system halts for unknown reasons, you are advised to hold down the
button until a system shutdown is initiated.