User's Manual

12
Operating TA-220/300 Magnetic Stripe Reader (Optional)
MT-series models also offer MSR solutions. As optional items, TA-220/300
both allow you to integrate built-in MSR into MT-series tablet. However, TA-
220 mainly supports MSR with RFID but TA-300 is an attachment combined
with three-track MSR and finger printer sensor.
Please go through the following instructions on how to operate magnetic stripe
reader provided via TA-220/300.
1. Have the side with the magnetic stripe of a card
face the touch panel of the tablet.
2. Swipe the magnetic stripe card along the track
of the reader from top to bottom or from
bottom to top.
Operating the 1D/2D Scanner (for MT-4308W/R & MT-
4310W/R & MT-4210A/R)
MT-4308W/R, MT-4310W/R and MT-4210A/R
models are equipped with an optional 1D CCD,
1D Laser, or 2D scanners features 1D and/or 2D
barcode scanning. It also supports two types of
USB interfaces, USB HID or USB Virtual COM,
and the scanner is generally set to USB HID
mode by default. For more detailed information,
please refer to the barcode scanner user manual.
Mounting TA-500 onto MT-series Tablet (Optional)
TA-500 is an external battery pack kit mainly
designed to provide extra battery life to MT-
series tablet. For the detailed installation
instructions, please refer to TA-500 user
manual.