User's Manual

5
Right Side View
Load RB-3000 Battery Pack and a stylus into Pistol Grip PG-
200E (for MT-4308W/R & MT-4310W/R & MT-4210A/R)
MT-4308W/R, MT-4310W/R and MT-4210A/R with PG-200E pistol grip
support 1D CCD, 1D Laser, and 2D barcode scanner. Before the scanner can
be initiated, it is required to install the battery pack RB-3000 and a stylus in
the battery compartment inside the pistol grip. Please follow the steps listed
below to finish the installation.
1. Press down the lever and then push up the cover for battery
compartment as shown in the figure.
2. To replace the existing battery, gently push
the metal clip outwards to release the
battery. If you are installing the battery for
the first time, please skip to the next step.
Metal clip
Power Button
Micro SD Card Slot
Smart Card Reader
(Optional)