Datasheet

Printed at 11-06-2015 23:06
- 1 -
IXARC Rotary Encoder
MCD-AVP04-0412-N060-PRM
Interface
Interface Analog Voltage
Manual Functions Programmable Start and End point via Cable or
Connector or Push Button
Outputs
Electrical Data
Supply Voltage 12 – 30 VDC (On power supplies comply with EN 50178)
Current Consumption Typical 15 mA
Start-Up Time < 250 ms
Min. Load Resistance 10 KΩ (Min. value for supply voltage 12 V. For higher
supply voltage lower load resistances can be used)
Linearity 0.15%
Analog Accuracy @ 5V = ± 15 mV; @10 V = ±25 mV
Settling Time 80 ms
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 262.2 years @ 40 °C
Sensor
Technology Magnetic
Resolution Singleturn 12 bit
Resolution Multiturn 4 bit
Multiturn Technology Self Powered Magnetic Pulse Counter (No Battery,
Wiegand Sensor)
Accuracy (INL) ±0.36°
Sense Signal (Default) Counterclockwise shaft movement (front view on shaft)
Code Analog Voltage 0.5 – 9.5 V
Minimum Measurement Range 0 – 22.5°
Resolution of Output Max. 12 bits over entire measureing range (Fractional
Turns - Resolution decreases less than 12 bits when
measurements range is less than 90 degrees)
Multiturn Range 16 turn (default setting). User can use the scaling
functionality to measure up to 32768 turns