Datasheet

Printed at 11-06-2015 17:06

- 1 -

IXARC Rotary Encoder

OCD-S5D1G-1416-S060-PAP

Interface

Interface SSI with Preset + Incremental RS422

Manual Functions Preset + complement via cable or connector

Interface Cycle Time > 25 µs

Outputs

Output Driver SSI (RS422) / Incr. (RS422)

Output Incremental A, /A, B, /B, Z, /Z

Quadrature Phasing 90° ± 4.5° electrical

Max. Frequency Response 2 MHz

Electrical Data

Supply Voltage 4.5 – 30 VDC (On power supplies comply with EN 50178)

Power Consumption ≤ 1.5 W

Start-Up Time < 250 ms

Clock Input RS 422, via Optocoupler

Clock Frequency 100 kHz – 2 MHz

Reverse Polarity Protection Yes

Short Circuit Protection Yes

EMC: Emitted Interference DIN EN 61000-6-4

EMC: Noise Immunity DIN EN 61000-6-2

MTTF 16.2 years @ 40 °C

Sensor

PAGE 1
IXARC Rotary Encoder OCD-S5D1G-1416-S060-PAP Interface Interface SSI with Preset + Incremental RS422 Manual Functions Preset + complement via cable or connector Interface Cycle Time > 25 µs Outputs Output Driver SSI (RS422) / Incr. (RS422) Output Incremental A, /A, B, /B, Z, /Z Quadrature Phasing 90° ± 4.5° electrical Max. Frequency Response 2 MHz Electrical Data Supply Voltage 4.5 – 30 VDC (On power supplies comply with EN 50178) Power Consumption ≤ 1.
PAGE 2
Technology Optical Resolution Singleturn 16 bit Resolution Multiturn 14 bit Multiturn Technology Mechanical Gearing (no Battery) Accuracy (INL) ±0.0220° (14 – 16 bit), ±0.
PAGE 3
Connection Plan SIGNAL PIN NUMBER Power Supply 11 GND 12 Data+ 3 Data- 4 Clock+ 2 Clock- 1 DIR 8 Preset 9 A 5 /A 6 B 7 /B 10 Z 13 /Z 14 Shielding Housing Connector-View on Encoder Pulse Diagram Printed at 11-06-2015 17:06 -3-
PAGE 4
Dimensional Drawing Contact Printed at 11-06-2015 17:06 -4-
PAGE 5
FRABA America +1 (609) 750-8705 info@fraba.com FRABA Europe +49 (0) 221 96213-0 info@fraba.eu FRABA Asia +65 6514-8880 info@fraba.sg The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.