Datasheet

ManualsBrandsPOSITAL FRABA ManualsSensorsSingle-turn Rotary encoder Optical Synchro flange

Printed at 11-06-2015 19:06

- 1 -

IXARC Rotary Encoder

OCD-S6B1G-0016-S06S-PRP

Interface

Interface SSI with Preset + Incremental Push Pull

Manual Functions Preset via push button and cable or connector

Transmission Rate ≤2 Mbaud

Outputs

Output Driver SSI (RS422) / Incr. (Push Pull)

Electrical Data

Supply Voltage 10 – 30 VDC (On power supplies comply with EN 50178)

Power Consumption ≤ 2.5 W

Start-Up Time < 1 s

Clock Input RS 422, via Optocoupler

Clock Frequency 100 kHz – 2 MHz

Reverse Polarity Protection Yes

Short Circuit Protection Yes

EMC: Emitted Interference DIN EN 61000-6-4

EMC: Noise Immunity DIN EN 61000-6-2

MTTF 16.2 years @ 40 °C

Sensor

Technology Optical

Resolution Singleturn 16 bit

Accuracy (INL) ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)

Summary of content (5 pages)

PAGE 1
IXARC Rotary Encoder OCD-S6B1G-0016-S06S-PRP Interface Interface SSI with Preset + Incremental Push Pull Manual Functions Preset via push button and cable or connector Transmission Rate ≤2 Mbaud Outputs Output Driver SSI (RS422) / Incr. (Push Pull) Electrical Data Supply Voltage 10 – 30 VDC (On power supplies comply with EN 50178) Power Consumption ≤ 2.
PAGE 2
Code Gray Environmental Specifications Protection Class (Shaft) IP66/IP67 Protection Class (Housing) IP66/IP67 Operating Temperature -40 °C (-40 °F) - +85 °C (+185 °F) Humidity 98% RH, no condensation Mechanical Data Housing Material Steel Housing Coating Cathodic corrosion protection (>720 hrs salt spray resistance) Flange Type Synchro, ø 58 mm (S) Flange Material Aluminum Shaft Type Solid, Length = 10 mm Shaft Diameter ø 6 mm (ø 0.24") Shaft Material Stainless Steel V2A (1.
PAGE 3
Connection Plan SIGNAL PIN NUMBER Power Supply 11 GND 12 Data+ 3 Data- 4 Clock+ 2 Clock- 1 DIR 8 Preset 9 A 5 /A 6 B 7 /B 10 Z 13 /Z 14 Shielding Housing Connector-View on Encoder Pulse Diagram Printed at 11-06-2015 19:06 -3-
PAGE 4
Dimensional Drawing Contact Printed at 11-06-2015 19:06 -4-
PAGE 5
FRABA America +1 (609) 750-8705 info@fraba.com FRABA Europe +49 (0) 221 96213-0 info@fraba.eu FRABA Asia +65 6514-8880 info@fraba.sg The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.