Data Sheet

ManualsBrandsPOSITAL FRABA ManualsSensorsIncremental Rotary encoder 1 pc(s) Magnetic Blind hollow shaft 58 mm

Data Sheet

Printed at 15-02-2018 14:02

- 1 / 5 -

IXARC Incremental Encoder

UCD-IPH00-00512-HGS0-2AW

Interface

Interface Programmable Incremental

Programming Functions PPR (1-16384), Output, Counting Direction

Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)

Outputs

Output Driver Push-Pull (HTL)

Quadrature Phasing 90° ± 4.5° electrical

Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage

> V-3 V @ 9-30 V Supply Voltage

Output Voltage Low Level Push-Pull (HTL) < 0.5 V

Output Voltage High Level RS422 (TTL) > 4 V

Output Voltage Low Level RS422 (TTL) < 0.5 V

Maximum Frequency Response 1 MHz

Maximum Switching Current 50 mA per Channel

Electrical Data

Supply Voltage 4.75 – 30 VDC

Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @

24V DC

Power Consumption ≤ 1.0 W

Start-Up Time < 250 ms

Min. Load Resistance 120 Ω

Summary of content (5 pages)

PAGE 1
IXARC Incremental Encoder UCD-IPH00-00512-HGS0-2AW Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3) Outputs Output Driver Push-Pull (HTL) Quadrature Phasing 90° ± 4.5° electrical Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage Output Voltage Low Level Push-Pull (HTL) < 0.
PAGE 2
Reverse Polarity Protection Yes Short Circuit Protection Yes EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2 MTTF 280 years @ 40 °C Sensor Technology Magnetic Accuracy (INL) ±0.
PAGE 3
Weight 720 g (1.59 lb) Electrical Connection Connection Orientation Axial Cable Length 2 m [79"] Wire Cross Section 0.14 mm² / AWG 26 Material / Type PVC Cable Diameter 6 mm (0.24 in) Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.
PAGE 4
Rotation Clockwise (seen on shaft) 2D Drawing Accessories Configuration/Programming Tools UBIFAST Configuration Tool Data Sheet Printed at 15-02-2018 14:02 -4/5-
PAGE 5
Displays AP20-00 Counter AP20-D0 Counter (4 dig. o/p) AP20-0A Counter (analog o/p) AP20-DA Counter (4 dig. + analog o/p) DiMod Counter (Relay o/p) More Clamping Rings Clamping Ring B15 Contact Contact Us The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions.