Data Sheet

ManualsBrandsPosital Fraba ManualsEncodersPosital Fraba Absolute Rotary encoder 1 pc(s) UCD-S101B-0012-NA10-2AW Magnetic Synchro flange 58 mm

Data Sheet

Printed at 28-09-2017 00:09

- 1 / 5 -

IXARC Absolute Rotary Encoder

UCD-S101B-0012-NA10-2AW

Interface

Interface SSI with Preset

Programming Functions Absolute: Resolution, Revolution, Code, Preset

Manual Functions Preset + complement via cable or connector

Interface Cycle Time ≥ 25 µs

Number of Preset Cycles 5,100,000

SSI Format SSSSSSSSSSSS00

Video Manual

Watch a simple installation video

Outputs

Output Driver RS422

Electrical Data

Supply Voltage 4.5 – 30 VDC

Current Consumption Typical 50 mA

Power Consumption ≤ 1.0 W

Start-Up Time < 250 ms

Clock Input RS 422, via Optocoupler

Clock Frequency 100 kHz – 2 MHz

Reverse Polarity Protection Yes

Short Circuit Protection Yes

EMC: Emitted Interference DIN EN 61000-6-4

Summary of content (5 pages)

PAGE 1
IXARC Absolute Rotary Encoder UCD-S101B-0012-NA10-2AW Interface Interface SSI with Preset Programming Functions Absolute: Resolution, Revolution, Code, Preset Manual Functions Preset + complement via cable or connector Interface Cycle Time ≥ 25 µs Number of Preset Cycles 5,100,000 SSI Format SSSSSSSSSSSS00 Video Manual Watch a simple installation video Outputs Output Driver RS422 Electrical Data Supply Voltage 4.5 – 30 VDC Current Consumption Typical 50 mA Power Consumption ≤ 1.
PAGE 2
EMC: Noise Immunity DIN EN 61000-6-2 MTTF 500 years @ 40 °C Sensor Technology Magnetic Resolution Singleturn 12 bit Resolution Multiturn 0 bit Accuracy (INL) ±0.
PAGE 3
Electrical Connection Connection Orientation Axial Cable Length 2 m [79"] Wire Cross Section 0.14 mm² / AWG 26 Material / Type PVC Cable Diameter 6 mm (0.24 in) Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.
PAGE 4
2D Drawing Accessories Clamp Disc w/ Eccentric Hole-4pcs Clamp Disc w/ Centred Hole-4pcs Coupling Bellow Type-06-06 Coupling Bellow Type-06-10 Coupling Bellow Type-06-08 Coupling Bellow Type-06-(3/8") Coupling Bellow Type-06-(1/4") Coupling Jaw Type-06-06 Coupling Jaw Type-06-10 Coupling Jaw Type-06-08 Coupling Jaw Type-06-12 Coupling Jaw Type-06-(1/4") Coupling Jaw Type-06-(3/8") Coupling Disc Type-06-06 Data Sheet Printed at 28-09-2017 00:09 -4/5-
PAGE 5
Coupling Disc Type-06-10 More Mounting Bracket for Synchro Flange w/ fixtures Contact POSITAL Contact Us The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.