FJ1000MV TM120M-A User Manual Positioning Universal 1
FJ1000MV Contents 1 Introduction ....................................................................................................................3 1.1ID and Tooling Design.......................................................................................................3 2 Hardware.........................................................................................................................3 2.1 Physical and Electrical Specifications .......................................................
FJ1000MV 1.1 ID and Tooling Design Dimensions: 83.5mm*47.5mm*18mm Weight: 60g (with optional battery) 2.1 Physical and Electrical Specifications Input Voltage: 9-36VDC Power consumption: - Active mode: 100mA ＠12VDC - Sleep mode: <8mA ＠12VDC Operating temperature: -30℃ to 80℃ Storage temperature: -30℃to 80℃ 2.2 Input/Output Download and debug port: 1 SWD Interface: 1 Function LEDs: 2 GPS Status Green Cellular Status Orange Buzzer:1 2.
FJ1000MV 2.
FJ1000MV 2.6 System network structure GPS alarm is currently the most advanced security Settings. GPS alarm more expensive than ordinary burglar alarm, and need to pay the additional service fee, so the popularity is not high. And alarm is based on a GPRS network communication network, combining with the intelligent linkage of mobile phone and car anti-theft, this kind of alarm alarm is not restricted by distance, overlay network is wide, but need to pay the monthly rental.
FJ1000MV 2.three TM120M devices. 3.One DC 12V cable.
FJ1000MV 3.3 Description. 1. Connect the UART cable to the UART interface of MCU on the device, the other side connect to PC, you can communication to MCU with UART cable. 2. Connect the DC 12V cable to the connector of J203 on the device, the other side connect to DC 12V, you can use the DC 12v cable to supply power.
FJ1000MV 3. The other interfaces of the TM120M device are shown in the following pictures.(The Modem UART 2 on device is for modem debug and update firmware).
FJ1000MV Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
