User Manual

31 32
SIGNAL PATH
The signal path shows you how the signal is being processed. Each module in the signal path
provides different functionalities and a different control interface. This section will show you how
to work with these modules and how to get the tone you want.
Custom Panel
The Custom Panel shows how the pedal looks. You can custom-design the look of your pedal
by editing the options listed immediately below.
1. PHOTO
Load a photo from your iPad or computer
to use as the background image for the
pedal. You can alo adjust the image size
and its position on the pedal.
2. RENAME
Name or rename your pedal at any time.
3. BOX
Select the type of box. Different boxes
come with different knob placements and
numbers.
4. COLOR
Select the background color.
5. KNOB
Select the background color.
Delay Staget
The Delay stage allows you to design your own delay effect.
1. Drive (Dry/Wet)
This is a dry/wet knob that controls the
amount of distortion or dirt that is mixed
into the delay signal path.
2. Drive bypass switch
Bypasses the drive function on both the
wet and dry signal.
3. Delay Type selector
This selector allows you to switch between
Tape, Standard, Ping Pong, and
Reverse delays.
4. Time, note, dot , trip
When the Time Mode is selected, you can
set the milliseconds, note, dot (dotted note),
and trip (triplet) options. Doing so creates
delay patterns based on the current global
tempo, which you can adjust using the
global BPM option in the lower panel.
5. Time
Controls the amount of time between your
original signal and the delay’s output.