User Manual

35 36
6. Routing Option
Normal - All signals from the Delay Stage
will go into the modulation effect.
Wet Only - Only the wet signal will be
applied to the modulation effect.
7. Waveform
Selects the waveform used by the LFO
8. Rate
Controls the speed of the LFO.
9. Depth
Controls the depth of the LFO’s oscillation.
10. Width
Widens the stereo image of the modulation
effect.
11. Mix
Adjusts the dry/wet balance of the
modulation effect.
12. Reverb
Controls for the reverberation effect
include the following:
Size - Adjusts the reflection distance.
Level - Adjusts the reverb level.
Power Module
The Power Module controls the output stage of the effect. You can switch among different
power-supply options ranging from 6V to 18V batteries.
1. Attack
Determines how quickly compression is
applied.
2. Release
Determines how quickly compression
ceases and the signal level recovers.
3. COMP
Adjusts the overall compression amount
sent to the selected battery module.
4. Output
Adjusts the output gain after compression.
5. Battery
Sets the input level (threshold) above
which compression begins. It is affected
by the level of the COMP control.
6V: -45dB~-30dB
9V: -35dB~-20dB
12V: -25dB~-10dB
18V: -15dB~0dB