User Manual

7 8
Connect with BIAS Pedal app
BIAS Delay comes with a license for BIAS
Pedal - Delay Pack (desktop software).
You can redeem the software code on
our store page (see Redeem & Activate
My Software in this manual).
In addition to the BIAS Pedal desktop
software, there’s also a mobile version of
BIAS Pedal for iPad (sold separately).
To connect with the BIAS Pedal (desktop) software, simply connect BIAS Delay to your computer
using the supplied Micro USB cable and launch the BIAS Pedal software.
BIAS Delay will automatically connect with the BIAS Pedal software and initiate Remote
Mode (see the Remote Mode section of this manual).
*Note: If BIAS Pedal mobile is unable to detect your BIAS Delay, please check that the wireless function is turned on and try reconnecting
again. Also try placing your mobile device closer to the pedal.
To connect with BIAS Pedal mobile software, turn on
the Wireless function on BIAS Delay by engaging the
Wireless button on the rear panel. The LED will start
to blink, indicating that the pedal is now in pairing
mode and ready for connection.
Then launch BIAS Pedal mobile by going to
Settings => Connect. BIAS Pedal mobile will begin
searching for an active BIAS Delay nearby and
connect with the pedal automatically.