User Manual

9 10
OVERVIEW
Control Panel
・ Preset knob
Controls the currently engaged preset. Once
a parameter changes, the LED will start to
blink, indicating that a change has been
made to the current preset. Long-press the
Preset knob again to save your changes.
BIAS Delay comes with 20 presets in total,
with 10 presets assigned to each bank. Press
the knob to switch between the 1st bank (red)
and 2nd bank (blue).
・ MIX
Controls the echo level.
・ FEEDBACK
Controls the number of repeats.
・ TIME
Controls the delay time for each echo.
・ MOD
Controls the modulation effect’s level.
・ DEPTH
Controls the oscillation depth of the LFO.
・ RATE
Controls the oscillation speed of the LFO.
・ REVERB
Controls the level of reverberation.
・ NOTE
Selects a note value for the delay time:
quarter note, dotted eighth-note or
eighth-note triplet.
Footswitch Panel
Rear Panel
・ Input
Stereo ¼” TS Hi-Z jacks
・ Output
Stereo ¼” TS jacks
・ EXP.
¼” TRS jack for an expression pedal (see the
Expression Pedal section of this manual for
more information)
・ USB
Micro USB port for supplying power to the
pedal and for integrating the pedal with BIAS
Pedal (desktop) software
・ MIDI In/Thru
Supports standard MIDI communication using
a 5-pin MIDI connector (see the MIDI section
of this manual for more information)
・ Wireless button and associated LED
There are 3 different LED states for the
Wireless button:
>
LED blinks slowly - Indicates the pedal is
on standby.
>
LED blinks rapidly - Indicates wireless
connection is in pairing mode and ready to
connect with BIAS Pedal mobile.
>
LED is constantly lit - Indicates the pedal is
connecting with BIAS Pedal mobile software.
・ 9V DC Power Jack
Supports a 9V DC power supply with negative
tips. The minimum current draw is 270mA.
BIAS Delay comes with footswitches labeled A,
B and C and a Tap Tempo footswitch. The A, B
and C footswitches allow you to alternately
engage and bypass presets in BIAS Delay (see
the Footswitch Mapping section of this manual
for more information).
Using the Tap Tempo footswitch, you can tap the switch twice and the duration between taps will
determine the BPM value. (See the Tap Tempo and BPM sections of this manual for more informa-
tion.)