User Manual

15 16

・ Control

Once you’re done calibrating, the parameters will change linearly between their minimum and

maximum values when you depress the expression pedal.

7. Expression Pedal

BIAS Delay supports expression pedals, allowing you continuously variable control of multiple

parameters at once while playing live onstage or in a recording studio. BIAS Delay can work

with expression pedals fitted with standard TRS jacks. The expression pedal’s range of control

over BIAS Delay’s parameters is calibrated by moving knobs on your BIAS Delay, as is

explained below:

・ Calibration

1. Plug in an expression pedal with a TRS cable.

2. Engage the preset you want to control with the

expression pedal.

3. Hold down the Wireless button on the rear panel

to engage calibration mode. LED A will start to

blink. Set the expression pedal to its minimum

position and turn the pedal’s knobs to their

minimum values. Press footswitch A to save the

minimum parameter values for the expression

pedal. Footswitch B will automatically start to

blink as you finish calibrating the expression

pedal with footswitch A.

4. Set the expression pedal to its maximum

position, and turn the pedal’s knobs to their

maximum values. Press footswitch B to save the

maximum parameter values for the expression

pedal.

5. Hold down the Wireless button to leave Calibra-

tion mode.

8. MIDI

BIAS Delay supports standard MIDI commands:

・ MIDI IN - This connector receives MIDI commands from an external MIDI device. Patch the

MIDI Out connector on the external MIDI device to the MIDI IN connector on BIAS Delay.

・ MIDI THRU - - BIAS Delay will send the MIDI command it receives at its MIDI In connector

out its MIDI THRU port. You can connect MIDI THRU to another MIDI device to receive the

command from BIAS Delay.

・ MIDI Channel

The default MIDI Channel number is 1. With the BIAS Pedal app, you can select the MIDI

channel from 1-16 or select Omni (in which case it will receive MIDI commands on all

channels).

Value when exp. pedal in minimum position