No Screws or Nails No Tools Needed Each side has a hook and a arrow for connection. You can slide or snap each shield together.
This example shows the preferred method of installation: Snapping the shields together © 2019 Post Shields All Rights Reserved
Push the arrow side of the shield into the hook side with some force.
You will hear a snap sound when they connect creating your complete protection around your post.
Assemble 3 shields together and wrap around the post Then slide or snap the last shield into place © 2019 Post Shields All Rights Reserved
© 2019 Post Shields All Rights Reserved If sliding the shields, align the hook and arrow and push down. There will be some friction and will take some force. You could use a rubber mallet if needed.
Final top view © 2019 Post Shields All Rights Reserved
