FORZA 红外相机说明书 BUTTONS (按键) ON/OFF BUTTON (总开关) To turn device on or off, hold the on/off button for three seconds. (按右上角电源总开关 5 秒开机) Screen power on Screen power off After device activation, it may take up to five seconds for the decoder to finish setting up, in which an image will appear with the ‘starting’ signal.
Tap the icons on the main screen to initiate its corresponding functions. OFF ICON 1 (关机按键) ○ The off icon serves a similar function as the on/off button except offers additional convenience during usage. It powers off the device. SETTINGS ICON 2 (设定) ○ The settings icon allows user to configure the decoder and select other preferences. - Device ID: Each device has an unique ID. - Sleep: This option allows user to set a sleep timer—the period of time it takes for the device to enter sleep mode.
UPLOAD ICON 7 (上传) ○ Uploads codes and messages to online server, which can then be accessed through computer or other devices via the internet. STORAGE ALBUM ICON 8 (档案) ○ Clicking the storage album icon allows user to view decoded messages that have been successfully saved. 操作 1. 2. 3. 4. 5. .
DECODING QR CODE 1. Angle device to position the code within the borders of the camera viewfinder. 2. The code will automatically decode into a message that will appear on screen, where options are available – save, delete or upload. (available by clicking respective icons). 3. Click save icon and confirm button to approve action. 4. Saved decoded messages will be available for viewing at storage album. Auto scanning and decoding Storage Album 储存 PERSONALIZING DEVICE 1. Go to Settings. 2.
3. Press Save or Cancel to changes. CONNECTING TO WI-FI 1. Go to Wi-Fi. 2. Click Scan to search for available networks. 3. Once a preferred network is selected, enter its password. 4. Press Save. TRANSFERRING DATA TO OTHER DEVICES UPLOADING DATA TO SERVER 1. Connect to wi-fi. 2. Click Storage to view saved codes and messages. 3. Proceed to click Upload, which will then be followed by a progress bar that appears to indicate the percentage of information uploaded to server.
4. Log in to website to view transferred data. USB CABLE DATA TRANSFER (连接电脑传送资料) 1. Connect the decoder to another device using a USB cable. (USB 连接 电脑 2. Go to Settings. 3. Click Start under USB Storage. 4. Hard drive icon will show on other device. (在电脑上复制资料) 5. Press Eject button to disconnect. Power supply (电力供应) 1. The decoder is powered by a lithium-ion rechargeable battery. (锂离子电 池) CHARGING (充电) 1. Connect decoder to a power source using USB cable.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.