Owner manual

ManualsBrandsPotter ManualsSafetyHSC-1

POTTER ELECTRIC SIGNAL COMPANY, LLC

St. Louis, MO

(866) 956-1211 • (314) 595-6900 • FAX (314) 595-6999

www.pottersignal.com

Manual #5401057 • Rev K • 10/10

ALL SPECIFICATIONS SUBJECT TO REVISION

HIGH SECURITY CONTACT

SWITCH MODEL

HSC-1

INSTALLATION, OPERATION AND

INSTRUCTION MANUAL

Summary of content (6 pages)

PAGE 1
HIGH SECURITY CONTACT SWITCH MODEL HSC-1 INSTALLATION, OPERATION AND INSTRUCTION MANUAL POTTER ELECTRIC SIGNAL COMPANY, LLC St. Louis, MO (866) 956-1211 • (314) 595-6900 • FAX (314) 595-6999 www.pottersignal.
PAGE 2
HSC • 5401057-K • 10/10 HSC • 5401057-K • 10/10 WARRANTY INFORMATION The essential purpose of any sale or contract for sale of any of the products listed in the POTTER catalog or price list is the furnishing of that product. It is expressly understood that in furnishing said product, POTTER does not agree to insure the Purchaser against any losses the Purchaser may incur, even if resulting from the malfunction of said product.
PAGE 3
HSC • 5401057-K • 10/10 HSC • 5401057-K • 10/10 GENERAL DESCRIPTION MOUNTING AND INSTALLATION The model HSC, a High Security Contact switch is listed by Underwriters Laboratories, Inc. and Underwriters Laboratories of Canada for monitoring the open or closed position of safe and vault doors. The switch includes design features, which makes it highly defeat resistant in critical environments.
PAGE 4
HSC • 5401057-K • 10/10 HSC • 5401057-K • 10/10 OPERATION The following operating features and conditions exist with the switch and magnet units in its secured condition (positioned, mounted, and wired correctly): • Triple Biased Switch Operation - The three biased switches will be in the closed position when the switch is in its secured condition. Opening of the door or removal of the switch unit or magnet unit will cause an alarm condition.
PAGE 5
HSC • 5401057-K • 10/10 HSC • 5401057-K • 10/10 HSC-1 WIRING CONNECTION TO THE EVD-R (POTTER ELECTRONIC VIBRATION DETECTOR SYSTEM MODEL) DIMENSIONS Figure 4. WARNING: THE HIGH SECURITY CONTACT SWITCH UNIT AND MAGNET WERE MANUFACTURED AND TESTED AS A SET. THEY MUST BE INSTALLED AS A SET TO INSURE PROPER OPERATION. Figure 3. MODEL EVD-R TO EVD-M OR EVD-R TAMPERS HSC-1 NOTE: The green wire is not used, insulate the loose end.
PAGE 6
10 DWG# 1057-5 I.D. GROOVES DIRECTLY FACING EACH OTHER WITH ENDS ALIGNED .375 ALL DIMENSIONS IN INCHES MAGNET UNIT * THIS SPACE IS FOR EXAMPLE ONLY * PROPER GAP DISTANCE MUST BE DETERMINED USING INSTALLATION METHOD ON PAGE 5 OF MANUAL SWITCH UNIT 3.500 .500 4 HOLES FOR #8 OR M4 MOUNTING SCREWS (NOT SUPPLIED) .250 .250 1/8" (.125 DIA) HOLE FOR #6 PRY TAMPER SCREW (SUPPLIED) .408 HSC • 5401057-K • 10/10 Figure 5.