Assembly Instruction
Page 1/3
pottery barn kids
BENNETT BENCH
PRE-ASSEMBLY:
• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
• For your safety and ease, assembly by two adults is recommended.
• Remove all part and hardware from the box and lay out on a clean, carpeted, or scratch- free work
surface. Use care as some parts or hardware may have sharp points or edges.
• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts
and hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts misalign during assembly.
• The use of power tools for assembly is not recommended. Power tools can damage hardware or split
wood.
PARTS INCLUDED:
(A) Top (1)
(B) Leg (4)
(C) Bottom Tray (1)
HARDWARE INCLUDED:
(D) Flat Washer (8)
(E) Spring Washer (8)
(F) Nut (8)
(G) Wrench (1)
(H) Bolt 60mm (4)
(I) 4mm Allen Key (1)
B
A
C