Assembly Instruction

Page 3/4

3. Fasten knobs to drawers with knobs facing out using Phillips Head screwdriver. (See Fig. 3).

(Fig.3)

4. Carefully place the Changing Table Topper (B) on Changing Table Base (A), as shown in figure 4. Align the

pre-drilled holes of the Changing Table Topper (B) to the pre-drilled holes at the back of the Changing Table

Base (A). Fasten Mending plate (E) to the Changing Table Topper (B) and Changing Table Base (A) using (3)

Screws (D). Tighten with Phillips head screwdriver. Repeat with second Mending plate (E).

(Fig.4)

5. To fasten restraint strap, insert the buckle as shown in Figure 5. To release, press inward on the tabs.

(Fig. 5)

6. As a safety precaution, please follow the instructions enclosed to secure the changing table to the wall

using tipping-restraint kit included.

To Release

To Fasten