Assembly Instruction

3. Lay the Bed Slats (G) down on the inner edges of the Side rails (C) as shown. (Fig. 4) Secure each slat to the
inner edge of the Side rail (C) by inserting #8 x 30mm screw (O) through the pre-drilled holes at each end of the
slats and into the Side rails. (Figh.4)
(Fig 4)
B
E
4. Position the Foot Panel (E) exactly as shown. Insert the Foot Panel (E) into pre-drilled holes on the frame
(assembled in Step 3) by using the 5/16" x 3/4" Bolt (L), Spring Washer (N), and Washer (M). Tighten the
connections with the Allen key (S). Repeat same process for the remaining side of the Foot Panel. (Fig.5)
(Fig 5)