Assembly Instruction

pottery barn kids
CAMERON STORAGE HEADBOARD QUEEN
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.
HARDWARE ENCLOSED:
(1) Allen Key (J)
(24) ¼” x 28mm Allen Bolt (K)
(24) ¼” Spring Washer (L)
(24) ¼” Flat Washer (M)
(8) 4 x 30mm Long Wooden Screws (N)
(6) 4 x 25mm Medium Wooden Screws (T)
(4) 3 x 12mm Small Wooden Screw (U)
(4) Connecting bracket square (O)
PARTS INCLUDED:
(1) Top Panel (A)
(2) Top side panel (Left-Right) (B)
(3) Divider (C)
(1) Shelf (D)
(1) Back panel (E)
(1) Front Bottom Panel (F)
(2) Bottom side panel (Left –Right) (G)
(1) Stretcher at back (Top) (H)
(1) Stretcher at back ( Bottom) (I)
PRE-ASSEMBLY:
• Remove all parts and hardware from the box and lay out on a clear, carpeted or scratch-free work surface.
(The shipping box provides an ideal work surface), this will avoid damaging any parts during assembly. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
• Use the parts and hardware lists above to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.
ASSEMBLY INSTRUCTIONS:
1. Attach Top Side Panels (B) each side with Shelf (D) and secure Divider (C) by using (2) Screws (T) as shown
and secure Top Side Panels (B) by using (4) Allen Bolts, Flat Washers & Spring Washers as shown.
2. Reversed the assembled piece on a dust free carpet. Insert Back Panel (E) as shown.
3. Place Top Pane (A) onto assembled piece and secure using (4) Allen Bolts, Flat Washers & Spring Washers to
complete Top piece assembly. Note: The correct order for the washers to go on the Allen Bolt is: Spring Washer
first, Flat Washer second. Please see diagram.
4. To assemble bottom piece of Storage Headboard, secure Bottom Side Panel (G) with Bottom Front Panel (F)
using (6) Allen Bolts, Flat Washers & Spring Washers. And attach Back Stretcher Top (H) and Back Stretcher
Bottom (I) with (8) screws (N) as shown to complete assembly of Storage Headboard Bottom piece.
5. Connecting Top Piece and Bottom Piece together with (10) Allen Bolts, Flat Washers & Spring Washers to
complete assembly.
6. If connecting with Cameron Wall Cubby piece, using Squire Bracket (O) provided with (4) screws (U) to secure
as shown.
CARE INSTRUCTIONS:
• Dust with a clean, soft cloth.
• Avoid the use of chemicals and harsh cleaning agents.
• Do not climb on the Cubby.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181