Assembly Instruction

ManualsBrandsPottery Barn ManualsHome OfficePottery Barn Catalina 3 Shelf Bookcase

PRE-ASSEMBLY :

Pottery Barn Kids Manual Instruction

CATALINA TALL BOOKCASE

 Please read all instructions before beginning assembly.

 For your safety, assembly by two adults is recommended.

 The illustrations provided allow for easier assembly when used in conjunction with the

assembly instructions.

 Remove all parts and hardware from box and lay out on a carpeted or scratch-free work

surface, as this will avoid damaging any parts during assembly. The shipping box

provides an ideal work surface. Do not dispose of any contents until assembly is

completed to avoid accidentally discarding small parts or hardware.

 Save all packing materials until assembly is complete to avoid accidentally discarding

smaller parts or hardware.

 Use the parts and hardware lists to identify and separate each of the pieces included

prior to starting assembly.

 Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these

instructions may cause the bolts to misalign during assembly.

 If using power tools to aid in assembly please use caution. Power tools can damage

hardware of split wood.

1/5

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

Summary of content (5 pages)

PAGE 1
Pottery Barn Kids Manual Instruction CATALINA TALL BOOKCASE PRE-ASSEMBLY : Please read all instructions before beginning assembly. For your safety, assembly by two adults is recommended. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions. Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface.
PAGE 2
PARTS INCLUDED: A - 1 pcs (A) Top Panel D (B) Side Panel - 2 pcs ( R & L ) (C) Front Frame - 1 pcs (D) Back Frame - 1 pcs (E) Assembling Base - 1 pcs (F) Legs - 4 pcs (G) Back Panel - 1pcs (H) Adjustable Shelves - 2 pcs C G H B B H E HARDWARE INCLUDED: F F F F (J) Pen layers - 8 pcs (K) M6 x 45 JCBC Bolts – 4 pcs (L) M6 x 30 JCBC Bolts - 4 pcs (M) M6 Lock washers - 12 pcs (N) Half moons washer- 4 pcs (O) Allen Ball key – 1 pc (P) M6 x 3/4" JF Screw - 28 pcs (Q) M6 x 70 JCBC Bolts –
PAGE 3
1. Assembly (B) side panel L & R, with (C), Front frame using half moon washer (N), Bolts (K), Lock washer (M) and Allen ball key (O) for tighten, as shown picture 2. Lay down the assembled side panel with front and back crossbar (step 1) (the back side into the bottom side), than assembly top panel (A), assembled side panel with front and back crossbar (step 1), bottom base (E) and legs (F) on Catalina Tall Bookcase top panel (A) as shown on next pictures.
PAGE 4
3. Put the screw (R) to the Front Frame (C) and Back Frame (D) hole (at the center). Tighten the screws using Phillip screw driver ( not include) (S). 4. Assembly back panel (G) at the back side of Catalina Tall Bookcase with M6 x ¾” screw (P). Use Phillip screw driver (S) to tight up the screw. P 4/5 Thank you for your purchase stores | catalog | www.potterybarnkids.
PAGE 5
. Turn the Catalina Tall Bookcase stand-up position. Assembly the adjustable shelf into Catalina Tall Bookshelf by lay it on pen layer (J) after plug on pen layer (J) into built in hole in side panel. (J) CARE INSTRUCTIONS : For daily cleaning, wipe with a soft damp cloth. Wipe dry immediately · · Do not use glass cleaner, abrasives, wax or household cleaners on wood. · Check fasteners periodically for tightness. Do not over tighten ; this may cause distortion or breakage.