Assembly Instruction

3/4

ASSEMBLY INSTRUCTIONS

1. Pick desired location for the bed, then remove all furniture parts from it’s package and

put them on a carpeted scratched free surface. Hold Headboard (A) in a vertical position

tilted slightly forward. Attach Side Rails (C&D) to Headboard (A) by inserting the

hooked female hardware ends of the Side Rails (C&D) into slots in the Headboard (A)

posts. Push down firmly on the top of the Side rail (C&D) until they seat themselves

over the pins inside the legs slots as shown below. Be sure the small ledge on each Side

Rails (C&D) is facing inward and the Side Rail without storage (C) is on your desired

opening side for drawers.

2. Repeat above to assemble Side Rails (C&D) with Footboard (B).

3. Assemble Side rail with Storage (C) to Headboard (A) and Footboard (B), with Lock

washers (H), Flat washers (K) and Bolts (G). Tighten all bolts with Allen Key (L) till all

of them are in place.